Brush magnetic station – keep things tidy with magnets from magnets4you!
Brush magnetic station
Hello!
We just think that’s practical and good!
We have created an optimal solution for brushes in our warehouse.
The hook magnets used (Ø 16 mm) have sufficient power for this application.
How neodymium pot magnets with steel pot and screwed-in hooks work:
A strong neodymium magnet is embedded in a steel pot. This metal housing protects the neodymium magnet from damage and increases the adhesive force. In order to achieve optimal adhesive force, the flat gripper must rest directly on the metal surface. A thin iron sheet or a paint finish can reduce the adhesive force very quickly. The adhesive force only works on the open side of the magnet, as the steel pot shields the magnetic effect.
Special feature:
The hook is located on the back of the magnetic plate and is screwed into the existing threaded bushing with an internal thread. It’s maximum operating temperature is 80 °C.
The eyelet magnets made of neodymium are often required, which you can also find here. If a white paint finish and less adhesive force are required, use our white hook magnets made of ferrite.
The holding magnets / assembly magnets / flat grippers / pot magnets are particularly often used in industry, trade fairs and assembly construction. The strong pot magnets have also become indispensable in the advertising / display construction / lighting sector. Our hook magnets are always popular when attaching objects to ceilings.