Our customer came up with the idea of an invisible ceiling mount for light panels with the help of our products and shared it with us.
A large and heavy light panel must be securely and reliably attached to the ceiling.
Invisible ceiling mounting for light panels
Hello dear magnet shop team,
I was looking for a way to fix a light panel (600 x 300) without much effort.
Here I got the idea to try it with magnets. I found the ingenious pot magnets with countersink on your website.
The rest was relatively simple: mark out the center line and measure it precisely, pre-drill holes, attach magnets with countersunk screws, install the electrical system in the ceiling and the panel
Put on the magnets, done.
The fastening is bombproof. It can be removed again. This is the best solution for my needs.
Functioning of the neodymium pot magnets with steel pot:
The strong NdFeB magnets are installed in a steel pot. This metal housing protects the neodymium magnet from damage and increases the adhesive force. In order to achieve an optimal adhesive force, the pot magnet must rest directly on the metallic surface. A thin sheet of iron or paint can reduce the adhesive force very quickly. The adhesive force only acts on the open magnet side, since the steel pot shields the magnetic effect.
Special feature:
The magnet has a central hole with a counter bore. This allows the holding magnet to be securely screwed to the wall / ceiling using a countersunk screw. Metallic counterparts then adhere magnetically to this pot magnet. The maximum operating temperature is 80 ° C.
The holding magnets / assembly magnets / pot magnets are used particularly often in industry, trade fairs and assembly. Strong pot magnets are also indispensable in the advertising sector / display construction / lighting sector.