Our Instagram cooperation partner „kerbstück“ built a custom made knife block with our products. We would like to share this with you.
Dear Magnet Shop team,
Thank you again for providing your great magnets.
The two knife blocks made from an old oak truss beam, which I built with your help, turned out great.
Custom made knife block
Products used: Discmagnet Ø 25.0 x 7.0 mm N42 nickel – holds 12 kg and Neodymium pot magnet Ø 20.0 x 7.0 mm with countersink, holds 8 kg
You will be amazed at the magnetic power of the neodymium magnets. Due to the extremely high magnetization due to the neodymium-iron-boron used, even small discs become powerful magnets. We offer our largest selection of neodymium discmagnets. The range of possible applications for the super magnets is huge. Most of our neodymium discmagnets have the magnetic poles on the two opposite circular surfaces (axial magnetization). Some magnetic discs are diametrically magnetized, recognizable by the extra picture in the product picture.
Functioning of the neodymium pot magnets with steel pot:
The strong NdFeB magnets are installed in a steel pot. This metal housing protects the neodymium magnet from damage and increases the adhesive force. In order to achieve an optimal adhesive force, the pot magnet must rest directly on the metallic surface. A thin sheet of iron or paint can reduce the adhesive force very quickly. The adhesive force only acts on the open magnet side, since the steel pot shields the magnetic effect.
Special feature:
The magnet has a central hole with a counter bore. This allows the holding magnet to be securely screwed to the wall / ceiling using a countersunk screw. Metallic counterparts then adhere magnetically to this pot magnet. The maximum operating temperature is 80 ° C.
Holding magnets / assembly magnets / pot magnets are used particularly often in industry, trade fairs and assembly. The strong pot magnets are also indispensable in the advertising sector / display construction / lighting sector.
If you are looking for weaker and cheaper discmagnets, you will find them among the ferrite magnetic discs.
Visit our partner and see for yourself. It’s worth it!
What an amazing, handmade and unique piece! Thanks so much 🙂